Accessories

Arm Supports/Rests

Book Holders

Document Holders

Fitness/Wellness

Foot Rests

Heating Solutions

Laptop Solutions

Miscellaneous

Monitor Accessories

Monitor Arms - Accessories

Mouse Accessories

Office Essentials

Palm Supports/Rests

Phone Accessories

Reference Organizers

Seating Accessories

Switches/Interfaces

Task Lighting

Tablet Solutions

Writing Solutions

CLEARANCE ACCESSORIES

Search By:

Document Holders

< 1 2 3 4 >


Posturite SlideRite Document Holder

by Posturite



SlideRite Document Holders from Posturite can be used anywhere on the desk surface, and in some circumstances even inline between the keyboard and monitor. With a fixed 50° angle, the SlideRite positions documents at an angle that minimizes the n ...



SlideRite Document Holders from Posturite can be used anywhere on the desk surface, and in some circumstances even inline between the keyboard and monitor. With a fixed 50° angle, the SlideRite positions documents at an angle that minimizes the need to bend the neck, reducing potential strain.

SlideRite Document holders are made of 5mm thick frosted acrylic, and come equipped with a removable line guide to aid in navigating through text. The SlideRite is available in two compact yet versatile sizes. The standard model is 8.7" wide by 8.5" high by 9.4" deep and can hold letter-sized documents while the large SlideRite is 17.5" wide by 9.3" high by 9.4" deep and can hold two letter-sized documents side by side.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
1107103SlideRite Document Holder, Standard
1107104SlideRite Document Holder, Large





Clean-Doc Document Holder

by Bakker Elkhuizen



The Clean-Doc Document Holder from Bakker Elkhuizen is a convenient ergonomic inline document holder solution that can mount to any standard VESA 100 compliant LCD monitor arm. The Clean-Doc addresses the ergonomic concerns associated with repetitive ...



The Clean-Doc Document Holder from Bakker Elkhuizen is a convenient ergonomic inline document holder solution that can mount to any standard VESA 100 compliant LCD monitor arm. The Clean-Doc addresses the ergonomic concerns associated with repetitive neck rotation and flexion when using reference documents. This is accomplished by positioning these documents centrally, directly below the monitor. When not being used for document viewing the Clean-Doc can also be elevated from the desk and stored horizontally, creating more desk space. The clear acrylic easel has a convenient pen holder and can also be used to store both keyboard and mouse when not in use, ideal for offices with a "clean desk" policy.

When in use the Clean-Doc must rest on the desk surface, leaning back against the support bracket. Storing the Clean-Doc is accomplished by lifting the front edge until the unit is horizontal and sliding it into the support and storage bracket. Note that the Clean-Doc is a document holder and is not intended as a writing surface.

NOTE: When in use the Clean-Doc must rest on the desk surface while leaning back against the support bracket. The document holder platform CANNOT be suspended under the monitor in a higher position.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
BNECDOC440Clean-Doc Document Holder7328195





VUR-59GR Inline Document Holder

by Vu-Ryte



The Vu Ryte 59GR Inline Document Holder mounts in conjunction with a monitor on any VESA-compatible monitor mount, keeping documents directly in front of users regardless of the position of the monitor. This helps to reduce neck and upper back strain ...



The Vu Ryte 59GR Inline Document Holder mounts in conjunction with a monitor on any VESA-compatible monitor mount, keeping documents directly in front of users regardless of the position of the monitor. This helps to reduce neck and upper back strain caused by constant movement of the head (which occurs when users are viewing documents placed flat on the desk or to the side), and to reduce elbow and shoulder strain caused by overreaching when repositioning reference materials. By attaching directly to the monitor arm, the VUR-59GR moves in tandem with the monitor, making it suitable for use even with sit/stand monitor arms. In addition, the VUR-59GR optimizes workspace by floating above the desk, thereby allowing other desk tools to be brought into the user's comfort zone.

The VUR-59GR is adjustable in height, depth, and angle, and can be reconfigured to support documents ranging in size from envelopes to 8.5" x 11 papers.

Note: The 59GR does not easily accommodate legal-sized or larger papers, and is not designed as a writing surface.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
VUR-59GRVUR-59GR Inline Document Holder





CopyFlex III

by Sun-Flex



This inline metal document holder provides a more heavy-duty solution to document management than most traditional document holders on the market, filling the space from the bottom of your monitor to the top of your keyboard. Features include:




This inline metal document holder provides a more heavy-duty solution to document management than most traditional document holders on the market, filling the space from the bottom of your monitor to the top of your keyboard. Features include:

  • An adjustable aluminum strip for rule guide, with magnifying function built in
  • Heavy duty enough to Accommodate non-reference books (i.e. spines under 2")
  • Rubber coated surface to prevent paper from slipping off
  • Easel is 14.8" Wide x 9.8" High
  • Can be used for occasional writing tasks
  • Easel is adjustable to 7 different angles
  • Easel height is adjustable to 8 different positions.
  • Only raises monitor 2 mm




Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
CF-IIICopyFlex III





Book Stand / Copy Holder

by Aidata



The Book Stand / Copy Holder from Aidata is an economical all-in-one solution that effectively serves as a book stand, copy holder and photo frame. The non-skid stand has 3 viewing angle adjustments, with the sturdy plastic construction capable of su ...



The Book Stand / Copy Holder from Aidata is an economical all-in-one solution that effectively serves as a book stand, copy holder and photo frame. The non-skid stand has 3 viewing angle adjustments, with the sturdy plastic construction capable of supporting up to a 1.5" thick book. Two adjustable page holders keep books open to the desired pages. An extendable document clip accommodates vertically-oriented 8.5" x 11" papers, and the convenient built-in picture frame will accommodate a 4" x 6" photo.



Le Book Stand / Copy Holder d'Aidata est une solution économique tout-en-un qui sert efficacement de support de livres, de porte-copies et de cadre photo. Le support antidérapant dispose de 3 ajustements d'angle de vue, la construction en plastique robuste pouvant supporter un livre d'une épaisseur maximale de 1.5po. Deux clips ajustable tiennent les pages en place et permettent d'ouvrir les livres aux pages souhaitées. Une pince à documents extensible permet de ranger des documents de 8.5po x 11po orientés verticalement, et le cadre photo intégré pratique peut accueillir une photo de 4po x 6po.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
BH001BBlack model5800325





Q-Doc Document Holder

by Bakker Elkhuizen



The Q-Doc Document Holders from Bakker Elkhuizen are elegant, "inline" document holders capable of supporting all kinds of documents, including heavy files and binders. Using the Q-Doc improves body posture and comfort level by centrally positioning ...



The Q-Doc Document Holders from Bakker Elkhuizen are elegant, "inline" document holders capable of supporting all kinds of documents, including heavy files and binders. Using the Q-Doc improves body posture and comfort level by centrally positioning documents between the monitor and keyboard, eliminating neck twisting when viewing reference documents. The work surface is fixed in that it cannot be drawn down over the keyboard as can other more versatile holders such as the FlexDesk 640. However, the Q-Doc holders still offer seven possible angle and height settings to align documents for optimal viewing in relation to screen height. The Q-Doc holders can be slid forward over the keyboard when writing or notating needs to be done, eliminating the need to reach forward. Doing this provides support for the hand and arm when writing and can significantly reduce the risk of shoulder strain.

There are two models of the Q-Doc. Model 415 is designed for use with compact keyboards and is 15.35" wide, 10.8" deep and 4.5" high. The larger model 515 will work with both compact and full-size keyboards and is 20.3" wide, 11.4" deep, and 4.7" high. With both models, as the document holder surface is adjusted to steeper angles the rear elevation does increase beyond the minimum shown. See the Specifications to see the maximum heights for each model.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
BNEQDOC415Q-Doc 415, Polished Clear Acrylic, 16.375" Wide7328196
BNEQDOC515Q-Doc 515, Polished Clear Acrylic, 20.25" Wide7328197





MultiRite Writing Platform / Document Holder

by Posturite



The MultiRite is an adjustable two-in-one writing surface and document holder which also has the ability to extend towards the user and 'float' over the keyboard without any need for support. The sides of the unit are composed of 2 sturdy plate metal ...



The MultiRite is an adjustable two-in-one writing surface and document holder which also has the ability to extend towards the user and 'float' over the keyboard without any need for support. The sides of the unit are composed of 2 sturdy plate metal sheets which are riveted at the front to a third centre piece. Side-mounted quick release knobs can be positioned to offer two ranges of adjustment. The lower range offers 8º to 22º of adjustment with the second range extending from 3º to 33º. The rear of the MultRite elevates from 4.7 inches to 6.7 inches or 4.7 inches to 8.25 inches depending on the range selected. The easel is made of rigid frosted acrylic with a 0.2" high metal ledge at the bottom to support documents. Two ball bearing tracks allow the easel to extend forward 6.5" (16.5 cm) along the track in the direction of the user, even able to drop 1.38" below the work surface. This is sufficient to some or all of the keyboard. This accessory eliminates the twisting and overreaching which often results when writing to the side or 'over' the keyboard.

The elevated secondary extendable worksurface provided by the MultiRite gives users the ability to bring a temporary writing surface into their primary comfort zone which is typically occupied by the keyboard, and store it when the task is complete. A magnet prevents unintentional movement of the easel when it is stored, and rubber feet ensure overall stability of the unit. The MultiRite can be used on both single and dual surface worksurfaces as well as workstations with articulating keyboard arms or drawers. It is available in three sizes of varying widths; Standard (20"), Mini (14") and Large (22").

Note: Two styles of Wrist Rest Accessory (sold separately) are available--Gel or Foam. The wrist rest is approximately 9" wide, fits into the pencil groove at the front of the easel, and slides to the other side of the easel when not needed. As well as its intended use, the wrist rest can also serve to hold a higher stack of loose papers in place.
Note: The Standard Width model is now avaiable as the Medium version of the Multirite Document Holder and Writing Slope.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
1104MMultiRite Writing Platform / Document Holder Version 2, with dual angle adjustment, Mini
Accessories
Model #DescriptionSynnex SKU
1104003 MultiRest Foam Wrist Rest Accessory, 0.75" Thick, 8.75" W x 1.375" D, Black Note: Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.
982-0410 MultiRest Gel Wrist Rest Accessory, 7/8" Thick, 9.5" W x 1.375" D, Black. Note: Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.





Insight Inline Copyholder with SmartFit System

by Kensington



An innovative 'inline' document holder which attaches to a base under the keyboard instead of under the monitor. This unit also folds over keyboard for an extended writing surface. Use your SmartFit comfort color to set the correct viewing angle. Acc ...



An innovative 'inline' document holder which attaches to a base under the keyboard instead of under the monitor. This unit also folds over keyboard for an extended writing surface. Use your SmartFit comfort color to set the correct viewing angle. Accommodates two 8.5" x 11" sheets side by side or books up to 1" thick. Choose from four configurations to fit different workspaces. Use on desktop or with an underdesk keyboard tray on an articulating arm. Metal base, rubberized edges and dual hinge adjustment for stability and easy adjustment.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
62097Insight Inline Copyholder withSmartFit System





Mouse Manager

by Interactive Products Corporation



The Mouse Manager enables the user to place documents, books and binders at eye level, reducing eye and neck strain, and creating a mousing area in a more comfortable location. The Mouse Manager is constructed from durable plastic and is available in ...



The Mouse Manager enables the user to place documents, books and binders at eye level, reducing eye and neck strain, and creating a mousing area in a more comfortable location. The Mouse Manager is constructed from durable plastic and is available in smoke (darkly tinted) or clear. The Mouse Manager can hold documents in a variety of shapes and sizes, from a single page, up to fifteen pounds of paper.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
MM-SMSmoke colour model





DocuRite Multi-Position Document Holder and Writing Slope

by Posturite



The DocuRite Multi-Position Document Holder and Writing Slope from Posturite combines the functions of an inline document holder and writing surface. It is placed centrally, between the keyboard and monitor. The large surface (19.5" W x 12" D) provid ...



The DocuRite Multi-Position Document Holder and Writing Slope from Posturite combines the functions of an inline document holder and writing surface. It is placed centrally, between the keyboard and monitor. The large surface (19.5" W x 12" D) provides plenty of space on which to store documents for easy access and notation. A lever-operated eccentric cam system lets the angle be increased by elevating the rear to three different heights. In addition a "stepped" front edge accommodates 4 levels of cantilever over the front edge of the desk for locations where a keyboard tray is in use. This offers further options for increasing the angle of the document surface as well as permitting the writing surface to be drawn almost three inches closer.

The DocuRite is made of 5mm thick acrylic which creates a firm writing surface with a frosted finish that ensures potential for glare is reduced. The lightweight construction also means the DocuRite can be easily repositioned as needed. A padded wrist rest doubles as a document ledge.

If overreaching is a concern the MultiRite, also from Posturite, permits the entire writing surface to be drawn forward over the keyboard, positioning the materials directly in front of the torso and providing support for the hand and arm when writing, thereby reducing the strain on the shoulder.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
982-0800DocuRite Multi-Position Document Holder and Writing Slope





< 1 2 3 4 >


Copyright © Micwil Group of Companies Ltd, Micwil is a Registered Trademark of Micwil Group of Companies Ltd.
Legal Notices Privacy