The SupporTech Seat Cushion features an innovative, valve-controlled air chamber which enables users to customize their seating experience. The finger-activated valve for the patented PostureLITE seating system permits precise adjustment of the air pressure within the internal air chamber, with individualized levels of variable seating comfort achievable throughout the day. The top of the air chamber is covered with a thin layer of memory foam which gently contours to the user's body contours, ensuring comfort and relief from pressure points. The cushioning but supportive comfort provided by the SupporTech Cushion helps to ensure correct pelvic positioning which in turn encourages improved posture that can be effective in addressing lower back pain.

PLEASE NOTE THAT WE ARE UNABLE TO OFFER A 30 DAY CUSTOMER SATISFACTION GUARANTEE ON THIS PRODUCT.

The Freestanding Double Leg Rest from Score serves as an adjustable and mobile support for those who need to keep one or both legs elevated while sitting. Potential applications include post-surgery elevation in order to relieve knee and foot pain, to decrease blood pooling in the lower extremities, to reduce pressure on the spine or to decrease fatigue.

This leg rest is equipped with a 5-point base which allows it to remain stable and upright without the need to attach it to any other furniture. The leg rest is wide enough to support both legs at once or can be used for a single leg as well, either beside or underneath the desk. Resilient foam padding helps keep the feet, knees and hips properly aligned while comfortably elevating the foot and leg. The 2" thick pad is 18.5" wide and 16" long, with slightly elevated sides to keep legs in position. The cushion is large enough to comfortably cradle even swollen legs and is upholstered with easily-cleaned leatherette.

The base is just under 20" in diameter to minimize interference with a chair base or desk supports. Elevation of the Freestanding Double Leg Rest is accomplished with a low-pressure gas spring with lever release. The adjustment range is from 14" - 19.5" and the leg pad can be angled up to 15° from horizontal and locks in at any point within the range. While the Freestanding Double Leg Rest can be used in most settings, because the base does have a diameter of 20" this should be taken under consideration when determining whether there will be sufficient space.

A Single Leg Rest is also available if elevation is only required for a single leg.

Le Freestanding Double Leg Rest de Score est une solution ajustable et mobile pour ceux qui ont besoin de garder une ou les deux jambes surélevée en position assise. Les applications potentielles sont pour être utilisé après une chirurgie afin de soulager la douleur aux genoux et aux pieds, de réduire l'accumulation de sang dans les extrémités inférieures, de réduire la pression sur la colonne vertébrale et de réduire la fatigue.

Ce repose-pied est équipé d'une base à 5 points qui lui permet de rester debout sans avoir à le fixer à un autre meuble. Le repose-pied est assez large pour soutenir les deux jambe à la fois aussi que seulement une jambe, soit à côté ou sous le bureau. Le rembourrage en mousse élastique maintient confortablement les pieds, les genoux et les hanches bien alignés tout en élevant le pied et la jambe. Le rembourrage concave est 2po d'épaisseur, et 18.5po de large et 16po de longueur, avec des bordures légèrement élever pour soutenir confortablement les jambes en place. Le coussin est suffisamment grand pour accueillir confortablement même les jambes enflées et est recouvert de similicuir facile à nettoyer.

La base mesure un peu moins de 20po de diamètre pour minimiser les interférences avec une chaise ou les jambes du bureau. L'élévation du Freestanding Double Leg Rest est accompli par un levier relâchement avec l'aide d'un vérin à gaz "à chaise" (gas spring). La hauteur peut être ajuster de 14po - 19.5po et le coussinet peut être incliné jusqu'à 15° à partir de l'horizontale et se verrouille en tout point de cette gamme. Le Freestanding Double Leg Rest peut être utilisé dans la plupart endroits, par contre, puisque la base a un diamètre de 20po, il faut bien prendre en compte qu'il va avoir l'espace suffisant.

Un Single Leg Rest est aussi disponible si l'élévation de seulement une jambe est nécessaire.

Compatible with most contemporary office chairs, the ErgoUP Double Leg Rest is designed to position a leg or knee in an elevated and easily replicable position. This model, with an 18" width, is wide enough to support either one or both legs. This makes it most suitable for situations where the Single or Curve models may not be wide enough. The ErgoUP keeps the foot, knee and hip properly aligned while elevating the foot and lower leg. It is often used following surgery in order to alleviate swelling or edema, relieve knee and foot pain, increase blood circulation, and decrease fatigue. For individualized comfort the ErgoUP Double Leg Rest is available with either Standard or Memory Foam padding, both of which are also available with fabric or leatherette coverings.

The ErgoUP can be attached to most standard office chairs (see note) and functions much like an ottoman does in a residential environment. The support attaches to the central post of the office chair with a velcro strap and rotates 360° to move to the side or rear of chair as required. It can also be fully adjusted in height and distance from the seat. The 1.5" thick rectangular pad is 18" wide x 12" deep and automatically aligns itself to provide the most comfortable angle of support. Unlike some freestanding leg supports, because the ErgoUP is connected directly to the base of the chair it is ideal for situations where a consistent or replicable position is desired.

NOTE: Bases with an unusually high crowning may not be compatible with this product. Please see the Dimensions image on the Detailed Specifications Page.

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

This modified seat is padded with a 1" thick layer of Comfort Memory Foam and features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The 15" W x 15" D seat will fit the majority of chairs or vehicle seats. As with other Sacro-Ease models, this Coccyx cutout version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery.

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.

The ErgoUP line of leg rests has been designed to position a leg or knee in an elevated and easily replicable position. Compatible with most contemporary office chairs, the ErgoUp Single Leg Rest is capable of supporting one leg at a time, and is the smallest size available. The ErgoUP keeps the foot, knee and hip properly aligned while elevating the foot and lower leg. It is often used following surgery in order to alleviate swelling or edema, relieve knee and foot pain, increase blood circulation, and decrease fatigue. For individualized comfort the ErgoUP is available with either Standard or Memory Foam padding, both of which are also available with fabric or leatherette coverings.

The ErgoUP can be attached to most standard office chairs (see note) and functions much like an ottoman does in a residential environment. The support attaches to the central post of the office chair with a velcro strap and rotates 360° to move to the side or rear of chair as required. It can also be fully adjusted in height and distance from the seat. The 1.5" thick square pad is 12" wide x 12" deep and automatically aligns itself to provide the most comfortable angle of support. Unlike some freestanding leg supports, because the ErgoUP is connected directly to the base of the chair it is ideal for situations where a consistent or replicable position is desired.

NOTE: Bases with an unusually high crowning may not be compatible with this product. Please see the Dimensions image on the Detailed Specifications Page.

Compatible with most contemporary office chairs, the ErgoUP Double Leg Rest with Bolsters is designed to position a leg or knee in an elevated and easily replicable position. This model, with a broader 20" width, is wide enough to securely support either one or both legs and includes elevated bolsters on both side to keep the legs safely supported. This makes it most suitable for situations where the Single or Curve models may not be wide enough. The ErgoUP keeps the feet, knees and hips properly aligned while elevating the feet and lower legs. These are often used following surgery in order to alleviate swelling or edema, relieve knee and foot pain, increase blood circulation, and decrease fatigue. The ErgoUP Double Leg Rest with Bolsters features comfortable Memory Foam padding to cushion the calves . The leg pad is upholstered in either breathable fabric or easily cleaned leatherette.

The ErgoUP can be attached to most standard office chairs (see note) and functions much like an ottoman does in a residential environment. The support attaches to the central post of the office chair with a velcro strap and rotates to move to the side or rear of chair as required. It can also be fully adjusted in height and distance from the seat. The 1.5" thick rectangular pad is 20" wide x 12" deep and automatically aligns itself to provide the most comfortable angle of support. Unlike some freestanding leg supports, because the ErgoUP is connected directly to the base of the chair it is ideal for situations where a consistent or replicable position is desired.

NOTE: Bases with an unusually high crowning may not be compatible with this product. Please see the Dimensions image on the Detailed Specifications Page.

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Standard Sacro-Ease Seat Support is the most basic model of this line of products. It features the primary steel base and rubber band structure with a simple cover of high quality durable upholstery. The cover is zippered for ease of removal and is washable. The seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.

A convenient handle facilitates transport between locations when the seat support is folded. This basic model is intended for use where shock absorbance is the key concern, with the stretched rubber bands acting as the sole source of cushioning. The back features an adjustable curved foam lumbar pad that is easily adjusted to any height along the back and can be used to enhance and provide cushioning over the lumbar curve of the steel frame.
Please Note: There is no foam padding in either the seat or back of this model, only in the foam lumbar pad.

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Cutout Sacro-Ease Seat Support features the primary steel base and rubber band structure with a cover of high quality durable upholstery. The modified seat portion is padded with a 1" layer of standard poly foam but features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The underside of the seat is a durable, non-skid material that keeps the Sacro-Ease firmly in place on all seats. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.

A convenient handle facilitates transport between locations when the seat support is folded. The Cutout model is specifically designed for applications where pressure on the Coccyx needs to be reduced. The cushioning effect of the stretched rubber band is supplemented by the 1" thick layer of poly foam cushioning with the pressure relief being offered by the coccyx zone cutout. Those who have a higher degree of sensitivity may derive greater benefit from one of the other SacroEase Seating options that feature thicker or different types of foam. The back features a curved foam lumbar pad that is easily adjusted to any height along the back and can be used to enhance and provide cushioning over the lumbar curve of the steel frame.
Please Note: There is no foam padding in the back of this model, only on the seat and in the foam lumbar pad.

Les Sacro-Ease Seat Supports de McCarty's Sacroease ont été conçus à l'origine, il y a plus de 70 ans, pour "reconstruire" le support qui se perd avec le vieillissement des coussins de siège et des structures de support. Ils permettent également d'améliorer la fonctionnalité des chaises de bureau ou des sièges inconfortables dans les transports en commun. Construits pour durer et surpasser les autres solutions disponibles, tous les modèles de Sacro-Ease Seat Supports reposent sur la même base qui les a toujours distingués des autres options disponibles. Une bande d'acier de 1/8po d'épaisseur et de 1po de largeur encadre le siège et le dossier des supports, avec une charnière pliante en acier à l'arrière du siège. Par-dessus ces cadres, des bandes de caoutchouc tendues servent à absorber les vibrations lors de déplacements sur des terrains mauvaises ou à offrir un coussin résistante lorsque l'on s'assis sur des sièges qui ne sont plus aussi souples qu'autrefois. Le cadre en acier est pliable, ce qui permet aux gens d'ajuster la courbure et la position des lombaires afin de bénéficier d'un support optimal.

Le Cutout Sacro-Ease Seat Support présente la structure primaire en acier et en bandes de caoutchouc avec une couverture de rembourrage durable de haute qualité. La partie modifiée du siège est rembourrée d'une couche d'un pouce de mousse de polyuréthane standard, mais comporte une découpe du coccyx de 2.5po de large sur 9po de profondeur, sans mousse, qui soulage la pression pour les personnes souffrant de blessures au coccyx ou d'autres conditions qui génèrent une sensibilité similaire à la pression. Le dessous du siège est un matériau durable et antidérapant qui maintient le Sacro-Ease fermement en place sur tous les sièges. Il est disponible dans la largeur standard de 15po mais est également disponible par commande spéciale dans une largeur de 12po qui convient aux sièges "bucket seats" plus étroits ou une largeur de 19po pour les sièges "bench seat". Des sièges plus profonds sont également disponibles par commande spéciale.

Une poignée pratique facilite le transport entre les lieux lorsque le support de siège est replié. Le modèle Cutout est spécialement conçu pour les applications où la pression sur le coccyx doit être réduite. L'effet de coussin de l'élastique étiré est complété par une couche de mousse de polyéthylène de 1po d'épaisseur, le soulagement de la pression étant assuré par la découpe de la zone du coccyx. Les personnes qui ont un degré de sensibilité plus élevé peuvent tirer un plus grand bénéfice de l'une des autres options de SacroEase Seating qui présentent des mousses plus épaisses ou différentes. Le dossier est doté d'un coussin lombaire en mousse incurvé qui se règle facilement à n'importe quelle hauteur le long du dossier et peut être utilisé pour améliorer et amortir la courbe lombaire du cadre en acier. Veuillez noter: Il n'y a pas de rembourrage en mousse dans le dos de ce modèle, seulement sur le siège et dans le coussin lombaire en mousse.

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

The Memory Foam Tapered Sacro-Ease Seat Support offers the highest degree of cushioning and comfort of any Sacro-Ease product. This "Seat Only" model is wedge-shaped to "fill" the dip that exists at the rear of many auto and truck seats. The tapered seat design also offers ergonomic benefits by elevating the hips which in turn helps to tilt the pelvis forward and restore the natural C-Curve of the spine. When correctly aligned the spine is able to better absorb impact and is also less susceptible to injury.

As with other Sacro-Ease models, this tapered seat version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery. The wedge-shaped seat tapers from 1" thick at the front to 3" thick at the rear. The seat cushion is comprised of two layers, the upper being a 1" layer of high quality Visco-Elastic Comfort Memory Foam that offers superior cushioning and vibration damping. The Memory Foam also contours to the body to aid in reducing potential pressure points. The upper layer of Memory foam is supported by an underlying wedge of high density poly foam that tapers up to 2" thick at the rear. The combined rear thickness of 3" is ideal cushioning for applications where extremely rough conditions are experienced

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. The RSCTW-18-SPECIAL-BLK (stocked) model is the standard 15" width but has an 18" deep seat for use in common fleet truck models equipped with deeper seats than most other vehicles. Other seat width and depth combinations are also available by Special Order.


Note: If this Sacro-Ease Seat Support is to be used in a vehicle with limited headroom please be aware that even when compressed this seat could elevate the user up to 2".

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Sacro-Ease Super Deluxe 2000 Seat Support is designed specifically for use on vehicle seats, especially narrow buckets with limited space between the side bolsters on the seat and back. As seats age it can become very easy to slouch into them, with the back rounding out to a C-Curve that can put extreme load on the lower back. The Super Deluxe 2000 model "fixes" the sagging by providing a support that no longer "sags". The hinged steel frame keeps users firmly positioned in a correct upright posture. By adjusting the curve of the frame to optimize the lumbar support each user can customize the seat support to meet their specific needs. A height adjustable lumbar pad can be used to further enhance the lumbar curve.

The Super Deluxe 2000 model features the primary steel base and rubber band structure with a cover of high quality durable upholstery. Both the seat and back rest are padded with a 1" layer of standard poly foam. The cushioning effect of the foam padding is enhanced by quilting that also creates a 3-D surface that is better suited to extended sitting than a flat surface. The seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats.

The frame on the Super Deluxe 2000 is narrower than other stocked models —the seat is just 12" x 12"—so that it can fit between the bolsters on deeper or narrower bucket seats. The back rest frame is only 10.5" wide to ensure that it sits flush against the backrest on the narrowest of seats. The quilted padded "wings" extend several inches past the frame on all edges to ensure a comfortable transition from Seat Support to bucket seat.

A convenient handle facilitates transport between locations when the seat support is folded. Although the Super Deluxe 2000 model is designed specifically with automotive use in mind, it can be effective wherever support, shock absorbance, and comfort are being considered.